Detailed Product Description

Introduction:

Bi-Directional converter for serial and parallel ATAThis Adapter Does-it-All, SATA Hard Drive To IDE COnverter or IDE Drive to SATA Host Converter

This is a bi-direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports a 1.5GHz data rate.

Parallel and Serial ATA Bi-Directional Converter FEATURES:

With LED Indicated power

Easy install & No driver Needed

Serial ATA 1.0 Specification compliant

Automatic Serial ATA 1.5 Gbps speed negotiation

ATA / ATAPI PIO mode 0 to 4

ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.

ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count

Support Serial ATA hot-plug

Ultra low power consumption

Work for both AC and DC couple between the transmitter and the receiver

Provide specified OOB signal detection and transmission

Support Spread Spectrum Clocking to reduce EMI

Support Partial/Slumber power management

Provide adjustable TX signal amplitude and pre-emphasis level

Slave support

Weight : 18.7g

Package Content:

big 4-pin power extension Y-cable x 1

SATA cable x 1